Release build of the software - is the latest version of the software that has been tested and debugged.
The release build version number is as follows: 2.X.XX.0. There is always 0 (zero) at the end. You can read more about installing the Release build version in the article Release build.
Software update is carried out:
manually ("Manually");
on request for permission to update ("Request permission").
The update mode is selected in the "Software Settings" window.
Please note that in case of problems with the TSLab application after selecting the "Update mode" - "Manual" function, Technical Supports service will ask you to upgrade to the latest Release version and reproduce the problem again before accepting your request.
Often the release of a new version is caused by fixing the problems that users have encountered or by updating the connector by the broker and the exchange. In this regard, the probability that the problem that is reproduced in your old version is already fixed on the new version significantly increases.
To check for updates "Manually", use the "Check for Update" command (Main menu | Tools | Check for Update).
If a new version is detected, the program displays a message box that offers the user to update.
After the update download is complete, you must restart the program.
After checking for updates, if a window appears with the message "The installed version is the latest", then the current Release build version has already been installed.
The "Request Permission" mode allows you to automatically check for new software updates every time you restart it.
Also, if you do not turn off the TSLab application for a long time, checking for new updates will be performed automatically at a certain time interval.
If a new version is detected, the program displays a message box that suggests:
accept the update by selecting "Yes";
refuse to update at the moment by clicking "No";
completely skip the update by clicking the "Skip".
ATTENTION! If you selected the "Request permission" mode in the "Program Settings", messages about the missed update will no longer be displayed and the installation of the missed update must be done manually.
ATTENTION! Before performing the TSLab update procedure, we strongly recommend that you read the article Preparing for the update. TSLab Technical Support recommends upgrading TSLab when agents are switched off and there are no positions.
Release build of the software - is the latest version of the software that has been tested and debugged.
The release build version number is as follows: 2.X.XX.0. There is always 0 (zero) at the end. You can read more about installing the Release build version in the article Release build.
Nightly Build – is a build performed between Release builds of the software. Corrections from the nightly builds of the software fall into the next release build version of the software.
The nightly build version number is as follows: 2.X.XX.ХХ You can read more about installing the Nightly build in the article Nightly build.
ATTENTION!
Nightly builds may contain changes that did not pass the testing procedure. In this regard, TSLab Technical Support recommends using Nightly builds only in the following cases:
Technical Support specialist examined the situation you encountered and recommended you installing the Nightly Build;
the list of fixed problems contains the one that is encountered by you.
In other cases, TSLab Technical Support recommends using the Release build version of the software.
Nightly Build – is a build performed between Release builds of the software. Corrections from the nightly builds of the software fall into the next release build version of the software.
The nightly build version number is as follows: 2.X.XX.ХХ
ATTENTION!
Nightly builds may contain changes that did not pass the testing procedure. In this regard, TSLab Technical Support recommends using Nightly builds only in the following cases:
Technical Support specialist examined the situation you encountered and recommended you installing the Nightly Build;
the list of fixed problems contains the one that is encountered by you.
In other cases, TSLab Technical Support recommends using the Release build version of the software.
TSLab 2.1 Nightly Build URL: http://www.tslab.ru/files/prerelease/TSLab210NightBuild.tsupdate
TSLab 2.2 Nightly Build URL: http://www.tslab.ru/files/prerelease/TSLab220NightBuild.tsupdate
Before updating the TSLab program, we strongly recommend that you read the article Preparing for update.
The TSLab User Support Service recommends updating the TSLab program when agents are turned off and there are no open positions.
In TSLab 2.2, you can upgrade the program to the Nightly build version by selecting the menu item Tools -> Update to a nightly build.
You can also open the nightly build installation window by pressing 4 keys "Ctrl" + "Alt" + "Shift" + "u"
In the window that opens, select "Current nightly build". Click the OK button to start the update.
Wait for the update to finish downloading. The loading indicator is located in the lower right corner of the main program window.
After downloading the Nightly build, you will be prompted to restart the program. Restart the program.
You can check the relevance of the installed nightly version by opening the program window Tools -> Update to a nightly build. For the menu item Current nightly build, the comment "Сurrent version is a latest build" will be added.
You can also update the program to the Nightly build version using the direct address of the Nightly build version:
Select Use URL to update.
Paste the link http://www.tslab.ru/files/prerelease/TSLab220NightBuild.tsupdate into the text field next to the selected item.
Click the OK button to start the update.
If for some reason you do not have an Internet connection on the computer with TSLab installed, you can download the update file on another PC and install the Nightly build version via the Use file to update menu item. You can download the file with the Nightly build version of the program at: http://www.tslab.ru/files/prerelease/TSLab220NightBuild.tsupdate
Before performing the TSLab update procedure, we strongly recommend that you read the article Preparing for update.
TSLab Technical Support recommends upgrading TSLab when agents are switched off and there are no open positions.
In the main window of the TSLab software, hold down the 4 keys "Ctrl" + "Alt" + "Shift" + "u"
In the window that appears, select "Use URL to update".
Copy the URL and paste it into the program:
http://www.tslab.ru/files/prerelease/TSLab210NightBuild.tsupdate
Click OK to continue.
After finishing the update installation, the program will suggest you to restart the TSLab software. To continue press "Yes".
In TSLab 2.2, you can restore the program to the latest Release version by selecting the menu item Tools -> Update to a nightly build.
In the Update to a nightly build window that opens, select the Release build (x.x.x.0) menu item. To start the recovery process, click the OK button.
Wait for the download process of the release version to finish (the recovery file download indicator is displayed in the lower left corner of the main program window), and then restart the program to complete the installation.
This operation can only be performed if the previous version of the Nightly Build was not removed from the server. If the previous version is removed, then it has big problems, or it is very outdated.
You can also restore the previous version of the Nightly build using Data Backup. To do this, before starting the update of the TSLab program, you need to make a backup copy of the software data (Preparing for the update), and select "Software" among other parameters.
In other cases, downgrade is possible only to the current Release version of the software.
ATTENTION! In order to avoid the loss of important and unsaved data, we strongly recommend that you back up TSLab data before updating the program.
To create a backup copy of the program, select Tools - Create Backup on the main menu bar.
In the window that opens, specify the data that will be saved on your computer, as well as the backup storage directory.
When you select the options to save the data cache in the Backup Properties, it may take a long time to create a backup file.
In some cases, the process of storing the data cache can take up to several hours.
Software update is carried out:
manually ("Manually");
on request for permission to update ("Request permission").
The update mode is selected in the "Program Settings" window.
To check for updates "Manually", use the "Check for Update" command (Main menu | Tools | Check for Update).
If a new version is detected, the program displays a message box that suggests:
accept the update by selecting "Yes";
refuse to update at the moment by clicking "No";
completely skip the update by clicking the "Skip"
ATTENTION! If you selected the "Request permission" mode in the "Program Settings", messages about the missed update will no longer be displayed and the installation of the missed update must be done manually.
The current release versions of the program are available on the website page:
